Saturday, 18 June 2016

PURE SINE WAVE INVERTER WITH LED AND LCD

The inverter PCB is easy to assemble by following the label of the components to be inserted. The choice of the voltage to be used to power the inverter ranging from 12v to 96v depends on kva you are designing. for any setup,  a 12v relay is to be used. 
The featuring M.C.U are the Microchip PIC16F72A  and  PIC16F876A
FEATURES OF THE ABOVE SCHEMATIC ARE STATED BELOW :

 INVERTER PROTECTION : LOW-BATTERY SHUTDOWN
                                              : OVER LOAD SHUTDOWN INPUT
                                              : O/P SHORT CCT SHUT-DOWN INPUT
                                              : HIGH TEMPERATURE SHUT-DOWN INPUT
                                              : LOW-BATTERY : BEEP START AT 11 V
                                              :INVERTER SHUT DOWN AT 10.5 V
                                              :10 SEC DELAY BEFORE CHARGING
                                              : AUTOMATIC VOLTAGE REGULATOR
                                               [INPUT: 180 V - 240 V]
                                               [OUTPUT: 211 V - 232 V]
                      
INVERTER  MONITOR  : 16*2 LCD DISPLAY
                                           : LED INDICATORS
                                           : ERROR LED
                                           : BUZZ


 
 Fig 1: COMPLETE SINE WAVE INVERTER MOTHERBOARD


 
Fig 2: COUPLING OF MODIFIED SINE WAVE INVERTER



                                           Fig 3: MODIFIED SINE WAVE INVERTER BOARD
                                      





FOR ENQUIRIES CALL 08138110639 0R 0701839970
Posted by at

6 comments:

  1. Unknown2 November 2016 at 11:50

    Please I need full details of the pure sine wave inverter in view of the cost of only the board and other details

    ReplyDelete
  2. Unknown2 November 2016 at 11:59

    Hi. Jvertech
    I am an electronic hobbyist and I am currently researching on how to design a pure sine wave inverter but I have little knowledge on the programming of the inverter software so I need your help either to give me details on how much you would charge me in teaching me how to write the program or program the chip and send to me with the circuit diagram and your pcb board. Kindly Send the details to my email address at: Klinergytechnolgies@gmail.com
    I would highly appreciate your help as I hope to do business with you. I keenly await your favourable consideration and response soon.
    Thank you.

    ReplyDelete
    Replies
    1. AKINKUNMI OLUFEMI3 November 2016 at 15:48

      Am having problem in sending message to your mail, you can provide another another mail or chat me up on 08138110639 or call 07018399701

      Delete
  3. ismail10 May 2017 at 01:04

    thanks sir but can you give a detailed explanation of the wiring

    ReplyDelete
  4. ismail10 May 2017 at 01:06

    thanks sir but can you give a detailed explanation of the wiring and connections of the various parts starting from those wires on the panel

    ReplyDelete
  5. Unknown3 March 2019 at 13:05

    Good evening, my friend, this project is very good. I would like more purchase information ..

    ReplyDelete

Subscribe to: Post Comments (Atom)